REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH

    A002BN3C01
    *a

    Component without harness connected

    (Rear Light Assembly LH)

    1. Apply battery voltage to the rear light assembly LH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 3

      		 Taillight illuminates

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 3

      		 Stop light illuminates

      If the result is not as specified, replace the rear light assembly LH or rear light socket and wire LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH

    A002BN3C01
    *a

    Component without harness connected

    (Rear Light Assembly RH)

    1. Apply battery voltage to the rear light assembly RH and check that the lights illuminate.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 3

      		 Taillight illuminates

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 3

      		 Stop light illuminates

      If the result is not as specified, replace the rear light assembly RH or rear light socket and wire RH.