HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the claw to temporarily install the headlight assembly.

    4. Install the headlight assembly with the bolt and 2 screws.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. ADJUST HEADLIGHT AIMING

    Click here