HEADLIGHT ASSEMBLY(for Halogen Headlight) REASSEMBLY

PROCEDURE


  1. INSTALL HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)


    1. A018K2AC01
      *a Aiming Screw

      Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

    3. A018K7SC01
      *a Aiming Screw

      Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration and engage the pin to install the headlight leveling motor to the headlight unit.

    4. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

  2. INSTALL CLEARANCE LIGHT BULB


    1. Install the clearance light bulb to the socket.

    2. A018LZWC01
      *a Socket

      Connect the socket with the clearance light bulb as shown in the illustration.

  3. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the headlight cord.

    2. A018M4E

      Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.

  4. INSTALL NO. 2 HEADLIGHT BULB


    1. A018KJW

      Turn the No. 2 headlight bulb as shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

  5. INSTALL NO. 1 HEADLIGHT BULB


    1. A018LXB

      Turn the No. 1 headlight bulb as shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

    2. A018H4M

      Connect the connector.

    3. A018JVCC01
      *a Lock Mark

      Turn the back cover assembly as shown in the illustration until the lock marks are aligned to install it.