WASHER LEVEL WARNING SWITCH REMOVAL

PROCEDURE

1. REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

2. REMOVE FRONT WHEEL RH

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

   Click here

4. REMOVE FRONT FENDER LINER RH

   Click here

5. DRAIN WASHER FLUID

   Click here

6. REMOVE LEVEL WARNING SWITCH ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Remove the level warning switch assembly as shown in the illustration.