WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assemblies and check the position that the washer fluid hits the windshield glass.

      Standard
      Washer fluid hits the windshield glass in the areas shown in the illustration.
      A018IL7C01
      *a Vehicle Center Line - -
      B004057 Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 398.3 mm (1.30 ft.) B 135.3 mm (5.33 in.)
      C 149.7 mm (5.89 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.