WIPER SWITCH REMOVAL

PROCEDURE


  1. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever and fully extend and lower the steering column.

    2. Lock the tilt and telescopic lever.

    3. A018H7I

      Turn the steering wheel assembly to the left and remove the screw.

    4. A018IYQ

      Turn the steering wheel assembly to the right and remove the screw.

    5. A018KHNC01
      *a Push

      Push the left side of the lower steering column cover and disengage the claw as shown in the illustration.

    6. A018LZBC01
      *a Push

      Push the right side of the lower steering column cover and disengage the claw as shown in the illustration.

    7. A018M2UC01
      *a Claw (A)
      *b Claw (B)

      Insert your fingers into the opening for the tilt and telescopic lever on the lower steering column cover and disengage the claw (A).

      Tech Tips

      Spread the claw to disengage it.

    8. Disengage the 2 claws (B) to remove the lower steering column cover.

  2. REMOVE UPPER STEERING COLUMN COVER


    1. A018KMH

      Disengage the 2 claws and 4 clips to separate the instrument cluster finish panel assembly from the upper steering column cover.

    2. A018MDK

      Disengage the 2 claws to remove the upper steering column cover.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Turn the steering wheel assembly to the right.

    2. A018KOXC01
      *a Screwdriver

      Disconnect each connector.

    3. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pushed with excessive force, it may break.