REAR WIPER RUBBER REPLACEMENT

PROCEDURE

1. REMOVE REAR WIPER BLADE

   
   

   1. 

      Raise the rear wiper blade to the position where the claw disengages with a click sound as shown in the illustration.

      Note

      Be careful not to damage the claw.

   2. 

      Pull the rear wiper blade straight toward the right side of the vehicle to remove it from the rear wiper arm.

      Note

      Do not lower the rear wiper arm with the rear wiper blade removed. The arm tip may damage the back door glass surface.

2. REMOVE REAR WIPER RUBBER

   
   

   1. 

      Lift and pull the end of the rear wiper rubber protrusion from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the rear wiper rubber. The rear wiper rubber backing plates may be deformed or the rear blade claws may be damaged.

      Tech Tips

      Lightly pushing the rear wiper rubber in the middle will allow it to be removed more easily.

   2. Remove the rear wiper rubber with the rear wiper rubber backing plates from the rear wiper blade.

   3. 

      Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.

3. INSTALL REAR WIPER RUBBER

   
   

   1. 

      Install the 2 rear wiper rubber backing plates to the rear wiper rubber.

      Note

      Install the backing plates facing the correct direction.

   2. 

      Insert the rear wiper rubber with the rear wiper rubber backing plates from the front end of the rear wiper blade to the rear end through the second claw.

   3. After pushing the rear wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

   4. 

      Slide the rear wiper rubber through the front end claw.

4. INSTALL REAR WIPER BLADE

   
   

   1. 

      Push the rear wiper blade straight toward the right side of the vehicle to install it to the rear wiper arm.

   2. 

      Engage the claw to install the rear wiper blade as shown in the illustration.

      Note

      Be careful not to damage the claw.