FRONT WIPER RUBBER REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WIPER BLADE


    1. Pull up the holder of the front wiper blade.

      A018JJ1C01
      *1 Front Wiper Arm *2 Front Wiper Blade
      *a Holder - -

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield glass surface.

  2. REMOVE WIPER RUBBER


    1. A018M2T

      Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.

    2. A018HRX

      Remove the 2 front wiper rubber backing plates from the wiper rubber.

  3. INSTALL WIPER RUBBER


    1. A018HGG

      Install the 2 front wiper rubber backing plates to the wiper rubber.

      Note


      • Align the protrusions on the wiper rubber and the notches of the backing plates.

      • Align the curve of the backing plates with the glass.

    2. A018M9K

      Install the wiper rubber to the front wiper blade as shown in the illustration.

      Note

      Push the wiper rubber and front wiper backing plates into the front wiper blade strongly to engage them securely.

  4. INSTALL FRONT WIPER BLADE


    1. Install the front wiper blade as shown in the illustration.

      A018K1JC01
      *1 Front Wiper Arm *2 Front Wiper Blade
      *a Holder - -

    2. Install the holder of the front wiper blade.