REAR WIPER MOTOR INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A018M8DC09
      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper intermittent operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B) and a negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor assembly.

    2. A018M8DC10
      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper continuous operation.


      1. Connect a battery positive (+) lead to terminal 4 (+B) and a negative (-) lead to terminal 3 (LS) and terminal 5 (E), and check that the motor operates.

        OK
        Motor operates.

        If the result is not as specified, replace the rear wiper motor assembly.