WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. for Fixed Glass Type:


      1. Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.

        Standard
        Washer fluid hits the back door glass in the area shown in the illustration.
        A018GW7C01
        *a Vehicle Center Line *b Edge of Back Door Glass
        B004057 Measurement - -
        Standard Measurement
        Area Measurement Area Measurement
        A 80.3 mm (3.16 in.) B 32.4 mm (1.28 in.)
        C 65.4 mm (2.57 in.) D 73.6 mm (2.90 in.)
        E 77.0 mm (3.03 in.) F 87.8 mm (3.46 in.)
        G 29.9 mm (1.18 in.) H 86.6 mm (3.41 in.)

        Tech Tips

        If the result is not as specified, replace the rear washer nozzle.

    2. for Glass Hatch Type:


      1. Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.

        Standard
        Washer fluid hits the back door glass in the area shown in the illustration.
        A018IAAC01
        *a Vehicle Center Line *b Edge of Back Door Glass
        B004057 Measurement - -
        Standard Measurement
        Area Measurement Area Measurement
        A 80.3 mm (3.16 in.) B 32.4 mm (1.28 in.)
        C 68.6 mm (2.70 in.) D 76.7 mm (3.02 in.)
        E 80.2 mm (3.16 in.) F 91.0 mm (3.58 in.)
        G 29.9 mm (1.18 in.) H 86.6 mm (3.41 in.)

        Tech Tips

        If the result is not as specified, replace the rear washer nozzle.