WIPER AND WASHER SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   

   NEXT

2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

   Tech Tips

   
   

   • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

   • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

   • The following 5 items are important points for problem analysis:

     What	Vehicle model, system name
     When	Date, time, occurrence frequency
     Where	Road conditions
     Under what conditions?	Driving conditions, weather conditions
     How did it happen?	Problem symptoms

   Result
   Proceed to NEXT

   
   

   NEXT

3. INSPECT BATTERY VOLTAGE

   
   

   1. Measure the battery voltage.

      Standard Voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

      Result
      Proceed to NEXT

   
   

   NEXT

4. PROBLEM SYMPTOMS TABLE

   
   

   1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B

   
   

   B

   GO TO PROBLEM SYMPTOMS TABLE Click here

   A

5. OVERALL ANALYSIS AND TROUBLESHOOTING

   
   

   1. Terminals of ECU.

      Click here

   2. Data List / Active Test.

      Click here

   3. Inspection.

   4. On-vehicle Inspection.

      Result
      Proceed to NEXT

   
   

   NEXT

6. ADJUST, REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   

   NEXT

7. CONFIRMATION TEST

   Result
   Proceed to NEXT

   
   

   NEXT

   END