POWER MIRROR CONTROL SYSTEM(w/ Memory) OPERATION CHECK


  1. CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION


    1. Turn the ignition switch to ON

    2. With the mirror select switch L switch on, check that the outer rear view mirror assembly LH surface moves up, down, left and right normally.

    3. With the mirror select switch R switch on, check that the outer rear view mirror assembly RH surface moves up, down, left and right normally.

  2. CHECK MEMORY AND REACTIVATION FUNCTION

    A01GEU1C01
    *A for LHD
    *B for RHD
    *a M1 Switch
    *b M2 Switch
    *c SET Switch

    Tech Tips

    The SET, M1 and M2 seat memory switches are shown in the illustration.


    1. Turn the ignition switch to ON and move the shift lever to P.

    2. A0029PPC12
      *a Turn to Fully Left Position

      Check the M1 switch.


      1. Using the outer mirror switch assembly, turn the mirror surface to the fully left position.

      2. Check that the buzzer sounds for 0.5 seconds and the seat and mirror surface position is memorized when the M1 switch is pressed within 3 seconds of the SET switch being pressed.

        Note


        • The mirror surface position will also be memorized when the M1 switch is pressed after first pressing and holding the SET switch.

        • The mirror surface position will not be memorized when the SET switch and M1 switch are pressed simultaneously.

        • The mirror surface position will not be memorized when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.

      3. Using the outer mirror switch assembly, turn the mirror surface to the fully right position.

      4. Press the M1 switch.

      5. Check that the buzzer sounds for 0.1 seconds and the mirror surface automatically moves to the memorized fully left position.

    3. A01GENLC04
      *a Turn to Fully Right Position

      Check the M2 switch.


      1. Using the outer mirror switch assembly, turn the mirror surface to the fully right position.

      2. Check that the buzzer sounds for 0.5 seconds and the seat and mirror surface position is memorized when the M2 switch is pressed within 3 seconds of the SET switch being pressed.

        Note


        • The mirror surface position will also be memorized when the M2 switch is pressed after first pressing and holding the SET switch.

        • The mirror surface position will not be memorized when the SET switch and M2 switch are pressed simultaneously.

        • The mirror surface position will not be memorized when 2 or more of the memory switches are pressed simultaneously (for example, M1 and M2) after first pressing the SET switch.

      3. Using the outer mirror switch assembly, turn the mirror surface to the fully left position.

      4. Press the M2 switch.

      5. Check that the buzzer sounds for 0.1 seconds and the mirror surface automatically moves to the memorized fully right position.

  3. CHECK POWER RETRACT MIRROR FUNCTION (w/ Retract Mirror)


    1. Turn the ignition switch to ON.

    2. At each outer rear view mirror assembly position, check the retractable mirror operation when operating the retractable outer mirror switch.


      1. A01GF18

        Move both outer rear view mirror assemblies to the driving position.

      2. Press the retractable outer mirror switch.

      3. Check that the right and left outer rear view mirror assemblies move from the driving position to the retracted position.

      4. A01GEW7

        Move both outer rear view mirror assemblies to the driving position.

      5. Move one of the outer rear view mirror assemblies to the forward position by hand.

      6. Press the retractable outer mirror switch.

      7. Check that the outer rear view mirror assembly in the forward position moves to the retracted position, and check that the other mirror moves to the retracted position.

      8. A01GF25

        Move the outer rear view mirror assemblies to the driving position.

      9. Move one of the outer rear view mirror assemblies to the retracted position by hand.

      10. Press the retractable outer mirror switch.

      11. Check that the outer rear view mirror assembly in the driving position moves to the retracted position.

      12. A01GF3I

        Move both outer rear view mirror assemblies to the retracted position.

      13. Press the retractable outer mirror switch on the outer mirror switch assembly.

      14. Check that both outer rear view mirror assemblies move from the retracted position to the driving position.

      15. A01GF3M

        Move both outer rear view mirror assemblies to the retracted position.

      16. Move one of the outer rear view mirror assemblies to the driving position by hand.

      17. Press the retractable outer mirror switch.

      18. Check that the retracted outer rear view mirror assembly moves to the driving position.

    3. Check the operation of the outer rear view mirror assemblies according to retractable outer mirror switch operations and ignition switch condition.


      1. When the outer rear view mirror assemblies are operating, turn the ignition switch off and check that the mirror operation stops immediately.

      2. Turn the ignition switch to ACC and press the retractable outer mirror switch. Check that the outer rear view mirror assemblies operate in the opposite direction.

    4. Check the operation of the outer rear view mirror assembly when it is blocked by an obstacle.


      1. When an outer rear view mirror assembly is moving to the retracted or driving position, block it by hand. Check that stops moving.

      2. With the outer rear view mirror assembly stopped partway, push the retractable outer mirror switch. Check that the outer rear view mirror assembly moves in the opposite direction.

  4. CHECK AUTO POWER RETRACT MIRROR FUNCTION (w/ Auto Retract Mirror)

    Tech Tips

    The default setting is Door Lock. If necessary, the function can be set to "ACC" through the customize function.

    Click here


    1. With the ignition switch off and the auto retractable outer mirror switch on, when the doors are unlocked through the entry function, wireless function or key-linked function, check that both outer rear view mirror assemblies move from the retracted position to the driving position, and stop in the driving position.

    2. With the ignition switch off and the auto retractable outer mirror switch on, when the doors are locked through the entry function, wireless function or key-linked function, check that both outer rear view mirror assemblies move from the driving position to the retracted position, and stop in the retracted position.

    3. When the ignition switch ACC and then turned off while the auto retractable outer mirror switch is on, check that both outer rear view mirror assemblies automatically move from the driving position to the retracted position.

    4. When the ignition switch off and then turned ACC while the auto retractable outer mirror switch is on, check that both outer rear view mirror assemblies automatically move from the retracted position to the driving position.

  5. CHECK MEMORY CALL FUNCTION


    1. Memory call function check


      1. With an electrical key transmitter sub-assembly recognition code registered, perform a wireless door unlock operation and check that opening the driver door causes the following:


        • The buzzer sounds for 0.1 seconds.

        • The driver seat and mirror surface positions automatically move to the memorized positions.

        Tech Tips


        • The registered electrical key transmitter sub-assembly recognition code is recalled automatically.

        • If the memory call function is not operated, the buzzer will not sound.

    2. With the ignition switch ON and the driver door closed, press and hold the M1 or M2 switch while carrying the electrical key transmitter sub-assembly. The main body ECU (multiplex network body ECU) will enter electrical key transmitter sub-assembly recognition code registration mode to allow a key to be linked to mirror surface memory position.

      Tech Tips

      If the seat memory switch is released before entering registration mode, the main body ECU (multiplex network body ECU) will not enter registration mode.

    3. When the manual door lock switch is pressed, check that the buzzer sounds once (0.5 seconds).

    4. With the ignition switch ON and the driver door closed, press and hold the SET switch while carrying the electrical key transmitter sub-assembly. The main body ECU (multiplex network body ECU) will enter electrical key transmitter sub-assembly recognition code deletion mode.

      Tech Tips

      If the seat memory switch is released before entering deletion mode, the main body ECU (multiplex network body ECU) will not enter deletion mode.

    5. When the manual door lock switch is pressed, check that the buzzer sounds twice (0.1 seconds each time).

  6. CHECK MEMORY CALL EMERGENCY STOP FUNCTION


    1. While a memory call function is operating, check that any one of the following actions will stop the memory call operation: 1) pressing the SET, M1, M2 or M3 switch, 2) moving the shift lever to R, 3) moving the mirror surface manually, or 4) moving the mirror surface to the uppermost, lowermost, leftmost or rightmost position.

  7. CHECK MIRROR HEATER FUNCTION


    1. Turn the ignition switch to ON.

    2. Check that pressing the mirror heater switch (rear window defogger switch) illuminates the indicator and warms the mirror surfaces.

    3. Check that after approximately 15 minutes, the indicator light turns off and the mirror heaters deactivate.

      Tech Tips

      There is a timer extension function which can operate the mirror heaters for up to an additional 45 minutes.