BACK DOOR CLOSER ECU REMOVAL

CAUTION / NOTICE / HINT

Note

When replacing the multiplex network door ECU, the back door automatic open stop position (memory stopped position) must be registered, so be sure to make a note of the automatic open stop position.

PROCEDURE


  1. REMOVE BACK WINDOW UPPER TRIM PANEL

    Click here

  2. REMOVE BACK DOOR TRIM COVER LH

    Click here

  3. REMOVE BACK DOOR TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)

    Click here

  5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER

    Click here

  6. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER

    Click here

  7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  8. REMOVE MULTIPLEX NETWORK DOOR ECU


    1. A002944

      Disconnect the 2 connectors.

    2. A002AEV

      Remove the 2 screws.

    3. Disengage the clip and guide to remove the multiplex network door ECU.