POWER BACK DOOR DRIVE UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE BACK WINDOW UPPER TRIM PANEL

    Click here

  2. REMOVE BACK DOOR TRIM COVER LH

    Click here

  3. REMOVE BACK DOOR TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)

    Click here

  5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER

    Click here

  6. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER

    Click here

  7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  8. REMOVE POWER BACK DOOR UNIT SET ASSEMBLY

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.


    1. A002ABHC01
      *a Grommet

      Disconnect the connector.

    2. Disengage the grommet.

    3. A002BCP

      Remove the 4 bolts and power back door unit set assembly.

      Note

      Remove the power back door unit set assembly while supporting the back door by hand.