HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY


    1. Pass the hood lock control cable assembly into the engine compartment.

    2. Pass the cable through the upper radiator support.

    3. Engage the hood lock control cable assembly to the 5 clamps and hood cable grommet.

  2. INSTALL HOOD LOCK ASSEMBLY


    1. A002A3H

      Apply MP grease to the sliding parts of the lock.

    2. Connect the hood lock control cable assembly.

    3. Install the hood lock assembly with the 2 bolts and hood lock bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    4. Connect the connector.

    5. A00271R

      Install a new hood lock nut cap.

  3. INSTALL RADIATOR GRILLE (w/o Dynamic Radar Cruise Control System)

    Click here

  4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  5. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.

  6. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  8. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  9. INSTALL FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY LH (for LHD)

    Click here

  10. INSTALL FRONT WHEEL LH (for LHD)

    Click here

  11. INSTALL FRONT FENDER LINER RH (for RHD)

    Click here

  12. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

    Click here

  13. INSTALL FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  14. INSTALL FRONT WHEEL RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  15. ADJUST HOOD SUB-ASSEMBLY

    Click here

  16. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  17. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

    Click here

  18. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  19. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  20. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  21. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here