HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  4. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. REMOVE FRONT WHEEL LH (for LHD)

  8. REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY LH (for LHD)

    Click here

  9. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  10. REMOVE FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  11. REMOVE FRONT WHEEL RH (for RHD)

  12. REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  13. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

    Click here

  14. REMOVE FRONT FENDER LINER RH (for RHD)

    Click here

  15. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  16. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A0027W4

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  17. REMOVE RADIATOR GRILLE (w/o Dynamic Radar Cruise Control System)

    Click here

  18. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  19. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. A00290FC01
      *a Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A002AJC

      Disconnect the connector.

    3. A0029QVC01
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. A0029FI

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  20. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. A002AIJC01
      *a Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A002B0C

      Disconnect the connector.

    3. A002ABNC01
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. A002C8J

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  21. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, disengage the 5 clamps and hood cable grommet as shown in the illustration.

      A00299FC01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp *b Hood Cable Grommet

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

  22. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, disengage 5 clamps and hood cable grommet as shown in the illustration.

      A002C4NC01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp *b Hood Cable Grommet

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.