HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas "a" through "d" are within each standard range.

      A018I7ZN01
      Standard Clearance
      Area Measurement Area Measurement
      a 9.31 to 12.31 mm (0.367 to 0.485 in.) b 8.91 to 11.91 mm (0.351 to 0.469 in.)
      c 3.4 to 6.4 mm (0.134 to 0.252 in.) d -1.4 to 1.6 mm (-0.0551 to 0.0630 in.)