GLASS HATCH OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT GLASS HATCH OPENER SWITCH ASSEMBLY


    1. A018L36C01
      *a

      Component without harness connected

      (Glass Hatch Opener Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Glass hatch opener switch assembly pushed Below 1 Ω
      1 - 2 Glass hatch opener switch assembly not pushed 10 kΩ or higher

      If the result is not as specified, replace the glass hatch opener switch assembly.