ROOF HEADLINING INSTALLATION

PROCEDURE


  1. INSTALL ROOF HEADLINING ASSEMBLY


    1. B003Z9K

      Put the roof headlining assembly into the vehicle through the back door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or body interior.

    2. for Roof Side (for Normal Roof):


      1. Install the roof headlining assembly with the 4 clips.

    3. for Roof Side (for Sliding Roof):


      1. Engage the 12 fasteners and install the roof headlining assembly with the 2 clips.

      2. Connect the connector to the sliding roof drive gear sub-assembly.

    4. B003ZVF

      for Rear Side:


      1. Engage the 3 clips.

    5. for Rear Pillar LH Side (w/o DAB Function):


      1. Engage the clamp and 2 guides.

      2. Install the bolt.

      3. Connect the connector.

    6. for Rear Pillar LH Side (w/ DAB Function):


      1. Engage the 2 clamps and 4 guides.

      2. Install the 2 bolts.

      3. Connect the connector.

    7. for Rear Pillar RH Side:


      1. Connect the rear washer hose assembly.

      2. Engage the 2 clamps and 3 guides.

      3. Install the 2 bolts.

      4. Connect the 2 connectors.

    8. for Front Pillar LH Side (w/o Rear Seat Entertainment System):


      1. Connect the 2 connectors.

      2. Engage the 3 clamps.

    9. for Front Pillar LH Side (w/ Rear Seat Entertainment System):


      1. Connect the 3 connectors.

      2. Engage the 3 clamps.

    10. for Front Pillar RH Side:


      1. Connect the rear washer hose assembly.

      2. Connect the connector.

      3. Engage the 3 clamps.

    11. for Windshield Glass Side:


      1. Connect each connector.

  2. CONNECT REAR ROOF SIDE RAIL GARNISH LH


    1. B003Z8Y

      Engage the 3 clips to connect the rear roof side rail garnish LH as shown in the illustration.

  3. CONNECT REAR ROOF SIDE RAIL GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL VISOR HOLDER

    Tech Tips

    Use the same procedure for the LH side and RH side.


    1. B003Z8P

      Engage the 2 claws.

    2. Push in the visor holder as shown in the illustration.

  5. INSTALL VISOR ASSEMBLY LH


    1. for "TORX" Screw:


      1. Using a T25 "TORX" socket wrench, install the visor assembly LH with the 2 screws.

    2. except "TORX" Screw:


      1. Install the visor assembly LH with the 2 screws.

  6. INSTALL VISOR BRACKET COVER (for LH Side)


    1. B00400S

      Engage the 4 claws to install the visor bracket cover.

  7. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. INSTALL VISOR BRACKET COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for all assist grip sub-assemblies.


    1. B003Z5O

      Install the clip to the assist grip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. Temporarily install the assist grip cover LH to the assist grip as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. B00407G

      Engage the 2 clips to install the assist grip sub-assembly.

    4. B003ZYU

      Engage the 2 claws to install the assist grip cover LH.

      Note

      After installing the assist grip cover LH and RH, make sure that the 2 clips on the assist grip sub-assembly are engaged securely.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  10. INSTALL REAR ASSIST GRIP ASSEMBLY

    Tech Tips

    Use the same procedure as for the assist grip sub-assembly.

  11. INSTALL NO. 1 COOLER AIR DUCT

    Click here

  12. INSTALL COOLER PLATE

    Click here

  13. INSTALL TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)

    Click here

  14. INSTALL TELEVISION BASE

    Click here

  15. INSTALL MAP LIGHT ASSEMBLY

    Click here

  16. INSTALL RAIN SENSOR COVER (w/ Rain Sensor)

    Click here

  17. INSTALL LANE DEPARTURE WARNING CAMERA COVER NO.1 (w/ Lane Departure Alert System)

    Click here

  18. INSPECT LANE DEPARTURE WARNING CAMERA COVER NO.1 (w/ Lane Departure Alert System)

    Click here

  19. INSTALL RAIN SENSOR COVER (w/ Lane Departure Alert System)

    Click here

  20. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

    Click here

  21. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH


    1. Pass the anchor of the rear No. 2 seat outer belt assembly LH through the inner roof side garnish assembly LH.

    2. Engage the claw and 4 clips to install the inner roof side garnish assembly LH.

  22. INSTALL QUARTER PILLAR GARNISH LH


    1. Pass the anchor of the rear No. 1 seat outer belt assembly LH through the quarter pillar garnish LH.

    2. Engage the claw, 2 clips and guide to install the quarter pillar garnish LH.

  23. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Engage the claw, 10 clips and 2 guides.

    2. Install the deck trim side panel assembly LH with the 3 bolts.

  24. INSTALL ROPE HOOK (for LH Side)


    1. B003ZUK

      Install the 2 rope hooks with the 2 bolts.

    2. Engage the 4 claws as shown in the illustration.

  25. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)


    1. B003ZZZ

      Turn the No. 1 luggage compartment trim hook as shown in the illustration to install it.

  26. INSTALL DECK TRIM POCKET COVER (for LH Side)


    1. B003ZNJ

      Engage the 2 claws to install the deck trim pocket cover.

  27. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Click here

  28. INSTALL DECK TRIM SIDE SERVICE HOLE COVER


    1. Engage the 2 guides.

    2. Engage the claw to install the deck trim side service hole cover.

  29. INSTALL NO. 2 DECK SIDE TRIM COVER


    1. Engage the 6 claws, clip and 2 guides to install the No. 2 deck side trim cover.

  30. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  31. INSTALL FRONT DECK SIDE TRIM COVER LH


    1. B004085

      Engage the 2 claws and guide to install the front deck side trim cover LH as shown in the illustration.

  32. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  33. INSTALL QUARTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  34. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH


    1. w/ Rear Automatic Air Conditioning System:


      1. Engage the clamp.

    2. Engage the claw, 10 clips and 2 guides.

    3. Install the deck trim side panel assembly RH with the 3 bolts.

  35. INSTALL ROPE HOOK (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  36. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  37. INSTALL DECK TRIM POCKET COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  38. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  39. INSTALL SIDE TRIM COVER RH (w/o Rear Automatic Air Conditioning System)


    1. B003ZZ1

      Engage the 4 claws to install the side trim cover RH.

  40. INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (w/ Rear Automatic Air Conditioning System)

    Click here

  41. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  42. INSTALL DECK TRIM SIDE BELT HOLE COVER RH


    1. B003ZN0

      Engage the 2 guides.

    2. Engage the 4 claws to install the deck trim side belt hole cover RH.

  43. INSTALL NO. 1 DECK SIDE TRIM COVER


    1. Engage the 5 claws, clip and 2 guides to install the No. 1 deck side trim cover.

  44. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  45. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  46. INSTALL CENTER PILLAR GARNISH LH


    1. Pass the anchor of the front seat outer belt assembly LH through the center pillar garnish LH.

    2. Engage the 2 clips.

    3. Install the center pillar garnish assembly LH with the screw.

  47. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

  48. INSTALL LOWER CENTER PILLAR GARNISH LH


    1. Engage the 4 claws and 2 clips to install the lower center pillar garnish LH.

  49. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. B003ZU3C01
      *a Alignment Mark (Red)
      B003ZIE Flange Position

      Align the alignment mark (red) on the rear door opening trim weatherstrip LH with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  50. INSTALL REAR DOOR SCUFF PLATE LH


    1. Lift up the rear seat adjusting handle and move the rear No. 1 seat assembly LH to the foremost position.

    2. B003ZQB

      Engage the 6 claws, 4 clips and 2 guides to install the rear door scuff plate LH.

  51. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

    Click here

  52. INSTALL FRONT PILLAR GARNISH LH


    1. Remove the protective cover.

    2. Make sure that the 2 front pillar garnish clips are not damaged.

      Note

      If a front pillar garnish clip is damaged, replace the front pillar garnish clip with a new one.

    3. B00402X

      Engage the front pillar garnish clip (A) to the front pillar garnish LH.

      Tech Tips

      Engage the front pillar garnish clip (A) so that it faces as shown in the illustration.

    4. B003ZFNC01
      *a Protective Tape
      *b 90°

      Push the front pillar garnish LH in the direction indicated by the arrow (1) shown in the illustration to engage the 2 guides.

    5. Using needle-nose pliers with the tips wrapped with protective tape, bend the end of the front pillar garnish clip (B) in the direction indicated by the arrow (2) shown in the illustration.

    6. Push the front pillar garnish LH in the direction indicated by the arrow (3) shown in the illustration and to engage it to the front pillar garnish clip (B).

    7. Using needle-nose pliers with the tips wrapped with protective tape, rotate the front pillar garnish clip (B) in the direction indicated by the arrow (4) shown in the illustration.

    8. Using needle-nose pliers with the tips wrapped with protective tape, push the front pillar garnish clip (B) in the direction indicated by the arrow (5) and rotate them to the position shown in the illustration.

      Tech Tips

      Make sure that the front pillar garnish clip (B) are positioned as shown in the illustration.

    9. B003ZA1C01
      *a Front Pillar Garnish Clip (A)
      *b Front Pillar Garnish Clip (B)

      Engage the 2 front pillar garnish clips to install the front pillar garnish LH.

      Tech Tips

      Make sure that the curtain shield airbag assembly LH is not pinched.

  53. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B003ZMAC01
      *a Alignment Mark (Blue)
      B003ZIE Flange Position

      Align the alignment mark (blue) on the weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  54. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. Engage the claw and clip.

    2. Install the cowl side trim sub-assembly LH with the clip.

  55. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Engage the 2 guides and 10 claws to install the front door scuff plate LH.

  56. INSTALL CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  57. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  58. INSTALL LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  59. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    1. B003ZDLC01
      *a Alignment Mark (Green)
      B003ZIE Flange Position

      Align the alignment mark (green) on the weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

      Note

      After installation, check that the corners fit correctly.

  60. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  61. INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  62. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  63. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. B003ZA2C01
      *a Alignment Mark (Pink)
      B003ZIE Flange Position

      Align the alignment mark (pink) on the weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip RH.

      Note

      After installation, check that the corners fit correctly.

  64. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  65. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  66. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  67. INSTALL REAR FLOOR FINISH PLATE


    1. Engage the 8 claws, 4 clips and 2 guides to install the rear floor finish plate.

  68. INSTALL REAR DECK FLOOR BOX


    1. Engage the 4 claws, 2 clips and 2 guides.

    2. Install the rear deck floor box with the nut.

    3. Fold the rear No. 2 seatback assembly LH and RH forward.

    4. Install the 7 clips.

  69. INSTALL DECK SIDE TRIM BOX LH


    1. Engage the 4 claws, clip and guide to install the deck side trim box LH.

  70. INSTALL TONNEAU COVER ASSEMBLY


    1. Install the tonneau cover assembly.

  71. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. Install the No. 3 deck board sub-assembly.

  72. INSTALL DECK BOARD ASSEMBLY


    1. Install the deck board assembly.