ROOF HEADLINING DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Normal Roof)

    Click here

  2. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Sliding Roof)

    Click here

  3. REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY

    Click here

  4. REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY (w/ DAB Function)

    Click here

  5. REMOVE REAR WASHER HOSE ASSEMBLY (for Normal Roof)


    1. w/ Adhesive Tape:


      1. Remove the adhesive tape from the roof headlining assembly.

        B003ZOJC01
        *A w/ Adhesive Tape - -

    2. Remove the rear washer hose assembly from the roof headlining assembly.

  6. REMOVE REAR WASHER HOSE ASSEMBLY (for Sliding Roof)


    1. w/ Adhesive Tape:


      1. Remove the adhesive tape from the roof headlining assembly.

        B003Z8LC01
        *A w/ Adhesive Tape - -

    2. Disengage each clamp and remove the rear washer hose assembly from the roof headlining assembly.

  7. REMOVE AIR DUCT SEAL

    Tech Tips

    Use the same procedure for all air duct seals.


    1. B003ZBI

      Remove the air duct seal.

  8. REMOVE SPOT LIGHT ASSEMBLY LH

    Click here

    Tech Tips

    Use the same procedure for the front side and rear side.

  9. REMOVE SPOT LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE ROOF HEADLINING SUPPORT PLATE (for Normal Roof)


    1. Remove the 2 roof headlining support plates.

      B003ZK6

  11. REMOVE ROOF HEADLINING SUPPORT PLATE (for Sliding Roof)


    1. Remove the 2 roof headlining support plates.

      B003ZVI

  12. REMOVE NO. 1 ROOF WIRE (for Normal Roof)


    1. Remove the adhesive tape from the roof headlining assembly.

      B003ZUXC01
      *A w/ EC Mirror *B w/ Rain Sensor without Lane Departure Alert System
      *C w/ Rain Sensor with Lane Departure Alert System - -
      B004057 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

      B004050C01
      *A w/ EC Mirror *B w/ Rain Sensor without Lane Departure Alert System
      *C w/ Rain Sensor with Lane Departure Alert System - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.

  13. REMOVE NO. 1 ROOF WIRE (for Sliding Roof)


    1. Remove the adhesive tape from the roof headlining assembly.

      B00409HC01
      *A w/ EC Mirror *B for RHD with Lane Departure Alert System
      *C for LHD with Rain Sensor *D for LHD with Lane Departure Alert System
      *E w/ Rear Seat Entertainment System - -
      B004057 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

      B003YZ8C01
      *A w/ EC Mirror *B for RHD with Lane Departure Alert System
      *C for LHD with Rain Sensor *D for LHD with Lane Departure Alert System

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.