ROOM TEMPERATURE SENSOR(for Rear) REMOVAL

PROCEDURE


  1. REMOVE COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR


    1. A018LH7C01
      B004057 Protective Tape

      Apply protective tape around the cooler (No. 2 room temp. sensor) thermistor.

    2. Using a screwdriver, disengage the 4 claws to disconnect the cooler (No. 2 room temp. sensor) thermistor.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disconnect the connector to remove the cooler (No. 2 room temp. sensor) thermistor.