COMPRESSOR(for 2GR-FKS) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE RADIATOR ASSEMBLY

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A0027UX

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A0027P3

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A00291C

      Disconnect each connector.

    2. Disengage each clamp.

    3. A002CLOC01
      B003ZIE Bolt
      B003Z8F Nut

      Remove the 2 bolts, 2 nuts and bracket.

    4. A002AZG

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts.

    5. Remove the compressor assembly with pulley.