BLOWER MOTOR CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL BLOWER MOTOR CONTROL

   
   

   1. Install the blower motor control with the 2 screws.

   2. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

3. INSTALL ROPE HOOK

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. INSTALL DECK TRIM POCKET COVER

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

7. INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (w/ Rear Automatic Air Conditioning System)

   Click here

8. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

9. INSTALL NO. 1 DECK SIDE TRIM COVER

   Click here

10. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

14. INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH

    Click here

15. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

16. INSTALL REAR FLOOR FINISH PLATE

    Click here

17. INSTALL REAR DECK FLOOR BOX

    Click here

18. INSTALL DECK SIDE TRIM BOX LH

    Click here

19. INSTALL TONNEAU COVER ASSEMBLY

    Click here

20. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

21. INSTALL DECK BOARD ASSEMBLY

    Click here