COMPRESSOR(for 1AR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A0027PB

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A002CEH

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A0027C6

      Disconnect the connector.

    2. Remove the bolt.

    3. A002BOIC01
      B003ZIE Bolt
      B003Z8F Nut

      Remove the 2 bolts and 2 nuts.

    4. A00282M

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts.

    5. Remove the compressor assembly with pulley.