BACK DOOR LOCK INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

   
   

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. 

      Install the back door lock assembly with the 3 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

   3. Connect the connector.

2. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

   Tech Tips

   Make sure to remove the string before installing a new back door lock assembly.

   
   

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. 

      Install the back door lock assembly with the 4 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

   3. Engage the clamp.

   4. Connect the connector.

3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

4. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER

   Click here

5. INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER

   Click here

6. INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)

   Click here

7. INSTALL BACK DOOR TRIM COVER LH

   Click here

8. INSTALL BACK DOOR TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

9. INSTALL BACK WINDOW UPPER TRIM PANEL

   Click here