TRANSMITTER BATTERY(w/ Smart Entry and Start System) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. for Type A:


      1. A018HUIN02

        Push the release hook button and remove the mechanical key.

      2. A018HVZC23
        *a Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A018KG4C15
        *a Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery.

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

    2. for Type B:


      1. A018HUI

        Push the release hook button and remove the mechanical key.

      2. A018HVZC24
        *a Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A018HU1

        Disengage the 2 claws to remove the cover.

      4. A018LNPC11
        *a Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery.

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

  2. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. A018HL6

        Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during installation.

        • Keep the inside of the transmitter housing cover free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A018J97

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A018H1D

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when a switch is pressed.

    2. for Type B:


      1. A018L0W

        Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during installation.

        • Keep the inside of the transmitter housing cover free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A018J80

        Engage the 2 claws to install the cover.

      3. A018J97

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. A018H1D

        Insert the mechanical key into the transmitter.

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when a switch is pressed.