DOOR CONTROL RECEIVER(w/o Tire Pressure Warning System) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER (w/o Smart Entry and Start System)

   
   

   1. Engage the 2 guides to temporarily install the door control receiver.

   2. Install the door control receiver with the bolt.

   3. Connect the connector.

2. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Entry and Start System)

   
   

   1. Engage the 2 guides to temporarily install the smart door control receiver assembly.

   2. Install the smart door control receiver assembly with the bolt.

   3. Connect the connector.

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

4. INSTALL ROPE HOOK

   Click here

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

6. INSTALL DECK TRIM POCKET COVER

   Click here

7. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

   Click here

8. INSTALL NO. 2 DECK SIDE TRIM COVER

   Click here

9. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

   Click here

10. INSTALL FRONT DECK SIDE TRIM COVER LH

    Click here

11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

12. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

13. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

    Click here

14. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

15. INSTALL REAR FLOOR FINISH PLATE

    Click here

16. INSTALL REAR DECK FLOOR BOX

    Click here

17. INSTALL DECK SIDE TRIM BOX LH

    Click here

18. INSTALL TONNEAU COVER ASSEMBLY

    Click here

19. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

20. INSTALL DECK BOARD ASSEMBLY

    Click here