DOOR CONTROL RECEIVER(w/o Tire Pressure Warning System) REMOVAL

PROCEDURE

1. REMOVE DECK BOARD ASSEMBLY

   Click here

2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

3. REMOVE TONNEAU COVER ASSEMBLY

   Click here

4. REMOVE DECK SIDE TRIM BOX LH

   Click here

5. REMOVE REAR DECK FLOOR BOX

   Click here

6. REMOVE REAR FLOOR FINISH PLATE

   Click here

7. REMOVE REAR NO. 2 SEAT ASSEMBLY

   Click here

8. REMOVE REAR OUTER SEAT TRACK BRACKET COVER LH

   Click here

9. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

10. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

11. REMOVE FRONT DECK SIDE TRIM COVER LH

    Click here

12. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

13. REMOVE NO. 2 DECK SIDE TRIM COVER

    Click here

14. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Click here

15. REMOVE DECK TRIM POCKET COVER

    Click here

16. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

17. REMOVE ROPE HOOK

    Click here

18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

19. REMOVE DOOR CONTROL RECEIVER (w/o Smart Entry and Start System)

    
    

    1. Disconnect the connector.

    2. 

       Remove the bolt.

    3. Disengage the 2 guides and remove the door control receiver.

20. REMOVE SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Entry and Start System)

    
    

    1. Disconnect the connector.

    2. 

       Remove the bolt.

    3. Disengage the 2 guides and remove the smart door control receiver assembly.