NETWORK GATEWAY ECU REMOVAL

CAUTION / NOTICE / HINT

Note


  • When disassembling the network gateway ECU, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

  • After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  3. REMOVE ECU INTEGRATION BOX LH (for RHD)

    Click here

  4. REMOVE NETWORK GATEWAY ECU (for LHD)


    1. A002CGP

      Disengage the 2 claws and remove the network gateway ECU.

  5. REMOVE NETWORK GATEWAY ECU (for RHD)


    1. A0028GU

      Disengage the 2 claws and remove the network gateway ECU.