BLIND SPOT MONITOR SENSOR REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A002ABDC01
      B003ZIE Connector
      B003Z8F Bolt
      B003ZMU Nut

      Disconnect the connector.

    2. Remove the bolt, 2 nuts and blind spot monitor sensor LH.

      Note

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. A0029JHC01
      B003ZIE Connector
      B003Z8F Bolt
      B003ZMU Nut

      Disconnect the connector.

    2. Remove the bolt, 2 nuts and blind spot monitor sensor RH.

      Note

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.