CLEARANCE WARNING ECU REMOVAL

CAUTION / NOTICE / HINT

Note

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END

    Click here

  6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE ECU INTEGRATION BOX

    Click here

  9. REMOVE CLEARANCE WARNING ECU ASSEMBLY


    1. for LHD:


      1. A002BCC

        Disengage the 2 claws to remove the clearance warning ECU assembly.

    2. for RHD:


      1. A002CKM

        Disengage the 2 claws to remove the clearance warning ECU assembly.