ULTRASONIC SENSOR(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL ULTRASONIC SENSOR BEZEL

   Tech Tips

   Use the same procedure for all ultrasonic sensor bezels.

   
   
   1. 

      *a	Keyhole
      *b	Slit

      Engage the 4 claws and install the ultrasonic sensor bezel to the rear bumper assembly.

      Tech Tips

      
      

      • This illustration is for the LH side. The orientation for the other side is the opposite of the LH side.

      
      

      • When installing the bezel, align the keyhole and slit as shown in the illustration.

2. INSTALL NO. 1 ULTRASONIC SENSOR

   Tech Tips

   Use the same procedure for all No. 1 ultrasonic sensors.

   
   

   1. Connect the connector.

   2. Engage the 2 claws to install the No. 1 ultrasonic sensor.

3. INSTALL REAR BUMPER ASSEMBLY

   Click here