NAVIGATION RECEIVER INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION RECEIVER ASSEMBLY

2. INSTALL NO. 1 RADIO RECEIVER BRACKET

   
   

   1. Install the No. 1 radio receiver bracket with the 3 screws.

3. INSTALL NO. 2 RADIO RECEIVER BRACKET

   
   

   1. Install the No. 2 radio receiver bracket with the 3 screws.

4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET

   
   

   1. Connect each connector.

   2. Engage the 2 claws and 2 clips to temporarily install the navigation receiver assembly with bracket.

   3. Install the navigation receiver assembly with bracket with the 4 bolts.

5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

   Click here

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. REPLACED OPERATION

    Click here