NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A00276T

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

    2. A002CK1

      Engage the 6 claws to install the 2 new terminal covers with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal covers into the condenser.

      • If a terminal cover has been deformed during installation, replace the terminal, terminal covers and condenser with new ones.

    3. A0029P9

      Insert the cover as shown in the illustration and engage the claw.

    4. Engage the clamp to temporarily install the new radio setting condenser with wire harness.

    5. Install the new radio setting condenser with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL ROPE HOOK

    Click here

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  6. INSTALL DECK TRIM POCKET COVER

    Click here

  7. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    Click here

  8. INSTALL NO. 2 DECK SIDE TRIM COVER

    Click here

  9. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  10. INSTALL FRONT DECK SIDE TRIM COVER LH

    Click here

  11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  12. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  13. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

    Click here

  14. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  15. INSTALL REAR FLOOR FINISH PLATE

    Click here

  16. INSTALL REAR DECK FLOOR BOX

    Click here

  17. INSTALL DECK SIDE TRIM BOX LH

    Click here

  18. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  19. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  20. INSTALL DECK BOARD ASSEMBLY

    Click here