PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 90 seconds*1 or 120 seconds*2 before disconnecting the cable from the negative (-) battery terminal.
*1: w/ Toyota Link Function
*2: w/o Toyota Link Function
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the terminal is reconnected.
| System Name | See Procedure |
|---|---|
| Air Conditioning System (for Automatic Air Conditioning System) | |
| Air Conditioning System (for Manual Air Conditioning System) | |
| Parking Assist Monitor System | |
| Power Door Lock Control System | |
| Power Back Door System |
IGNITION SWITCH EXPRESSIONS
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) |
Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |