STEERING HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT STEERING HEATER SWITCH


    1. B003ZWYC03
      *a Component without harness connected (Steering Heater Switch)

      Remove the steering heater switch.

      Click here

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      F45-3 (IG) - F45-6 (IN) Steering heater switch is pushed Below 1 Ω
      F45-3 (IG) - F45-6 (IN) Steering heater switch is not pushed 10 kΩ or higher