REAR CENTER SEAT OUTER BELT ASSEMBLY(for Rear No. 1 Seat) INSTALLATION

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY


    1. Install the rear No. 1 seat center lap type belt assembly with the bolt and nut.

      Torque:
      Bolt
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
      Nut
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEAT SHOULDER BELT COVER RH


    1. A018LTA

      Engage the 2 claws and guide as shown in the illustration to install the rear seat shoulder belt cover RH.

  3. INSTALL BELT PROTECTOR

    A018JDR

    1. Wrap the seat belt webbing of the rear No. 1 seat center lap type belt assembly over the rear seat shoulder belt cover RH.

    2. A018JEC

      Engage the 4 claws as shown in the illustration to install the belt protector.

  4. INSTALL REAR SEATBACK COVER WITH PAD

    Click here

  5. INSTALL REAR SEAT SHOULDER BELT COVER

    Click here

  6. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  7. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    Click here

  8. INSTALL REAR NO. 1 SEAT COVER BEZEL

    Click here

  9. INSTALL REAR SEATBACK LOCK STRIKER COVER

    Click here

  10. INSTALL NO. 2 RECLINING REMOTE CONTROL LEVER KNOB

    Click here

  11. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

    Click here

  12. INSTALL REAR SEATBACK COVER RH

    Click here

  13. INSTALL REAR SEATBACK COVER

    Click here

  14. INSTALL REAR SEAT CUSHION COVER WITH PAD

    Click here

  15. CONNECT REAR SEAT CUSHION HEATER HARNESS (w/ Seat Heater System)

    Click here

  16. CONNECT REAR SEATBACK HEATER HARNESS (w/ Seat Heater System)

    Click here

  17. CONNECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY


    1. A018HKBC01
      *a Protruding Part

      Connect the anchor of the rear No. 1 seat center lap type belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 1 seat center lap type belt assembly to overlap the protruding part of the seatback frame.

  18. INSTALL REAR SEAT HINGE COVER

    Click here

  19. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  20. INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER

    Click here

  21. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE

    Click here

  22. INSTALL REAR SEAT COVER CAP

    Click here

  23. INSTALL NO. 1 REAR SEAT CENTER ARMREST PLATE

    Click here

  24. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

    Click here

  25. INSTALL CENTER ARMREST HINGE COVER RH

    Click here

  26. INSTALL REAR SEAT INNER BELT ASSEMBLY

    Click here

  27. INSTALL REAR SEAT REAR CUSHION MOULDING RH

    Click here

  28. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here