REAR CENTER SEAT OUTER BELT ASSEMBLY(for Rear No. 1 Seat) INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 1 CENTER SEAT LAP TYPE BELT ASSEMBLY


    1. A018IWNC01
      *a Retractor
      *b 0°
      *c 19°
      *d 33°
      *e Unlock
      *f Lock

      Before installing the rear No. 1 center seat lap type belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is between 19° and 33°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 19° or more than 33°, check that the belt locks.

        If the result is not as specified, replace the rear No. 1 center seat lap type belt assembly.