REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY


    1. A002B2HC02
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      i2-2 - i2-5 Rear No. 1 center seat belt unfastened Below 1 Ω
      Rear No. 1 center seat belt fastened 10 kΩ or higher
      i2-1 - C-3 Always Below 1 Ω
      i2-4 - C-2 Always Below 1 Ω

      If the result is not as specified, replace the rear seat inner belt assembly.