REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY


    1. A018GZOC01
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      L16-3 - L16-4 Rear center seat belt unfastened Below 1 Ω
      Rear center seat belt fastened 10 kΩ or higher
      L16-1 - C-3 Always Below 1 Ω
      L16-2 - C-2 Always Below 1 Ω

      If the result is not as specified, replace the rear seat inner belt assembly.