REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY

    Click here

  2. REMOVE REAR SEAT REAR CUSHION MOULDING RH

    Click here

  3. REMOVE REAR SEAT INNER BELT ASSEMBLY


    1. w/ Seat Belt Warning System:


      1. A01QW5UC02
        *a Hook
        *b Hog Ring

        Remove the 2 hog rings.

      2. Disengage the hook.

      3. Remove the 2 wire harness clamps.

      4. Disengage each clamp.

      5. Disconnect each connector.

    2. A018J11C01
      *a Rubber Band

      Remove the rear seat inner belt assembly from the rubber band of the rear seat cushion assembly as shown in the illustration.

    3. A018LKB

      Remove the bolt and rear seat inner belt assembly.