TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   Note

   
   

   • Do not drop, strike or otherwise subject the tire pressure warning ECU and receiver to impact.

   • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

   
   

   1. 

      Engage the 2 guides to temporarily install the tire pressure warning ECU and receiver.

   2. Install the tire pressure warning ECU and receiver with the bolt.

   3. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

3. INSTALL ROPE HOOK

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

5. INSTALL DECK TRIM POCKET COVER

   Click here

6. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

   Click here

7. INSTALL NO. 2 DECK SIDE TRIM COVER

   Click here

8. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

   Click here

9. INSTALL FRONT DECK SIDE TRIM COVER LH

   Click here

10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

11. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

12. INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

    Click here

13. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

14. INSTALL REAR FLOOR FINISH PLATE

    Click here

15. INSTALL REAR DECK FLOOR BOX

    Click here

16. INSTALL DECK SIDE TRIM BOX LH

    Click here

17. INSTALL TONNEAU COVER ASSEMBLY

    Click here

18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

19. INSTALL DECK BOARD ASSEMBLY

    Click here

20. REGISTER TRANSMITTER ID

    Click here

21. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

22. PERFORM INITIALIZATION

    Click here