REAR UPPER ARM REMOVAL

PROCEDURE


  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    for 2WD: Click here

    for AWD: Click here

  2. SEPARATE SKID CONTROL SENSOR WIRE LH (for 2WD)

    A002B3V

    1. Remove the 2 bolts and separate the skid control sensor wire LH from the rear upper control arm assembly LH.

  3. SEPARATE REAR SPEED SENSOR LH (for AWD)

    Tech Tips

    Perform the same procedure as for the skid control sensor wire LH.

  4. SEPARATE SKID CONTROL SENSOR WIRE RH (for 2WD)


    1. A0027XQ

      Remove the 2 bolts and separate the skid control sensor wire RH from the rear upper control arm assembly RH.

  5. SEPARATE REAR SPEED SENSOR RH (for AWD)

    Tech Tips

    Perform the same procedure as for the skid control sensor wire RH.

  6. REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH


    1. A002BP3

      Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.

      Note

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

  7. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.