FRONT STABILIZER BAR(When Using the Engine Support Bridge for AWD) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEELS

  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A002AH8

      Remove the 2 nuts and front stabilizer link assembly LH from the front shock absorber assembly and front stabilizer bar.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  4. REMOVE FRONT FRAME ASSEMBLY

    Click here

  5. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar with 2 front No. 2 stabilizer brackets and 2 front No. 1 stabilizer bar bushings from the vehicle body.

  6. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. Remove the front No. 1 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.

  7. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as for the LH side.

  8. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    1. A0028SH

      Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.

  9. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as for the LH side.

  10. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING


    1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.