DIFFERENTIAL MOUNT CUSHION REPLACEMENT

PROCEDURE


  1. REMOVE SPARE TIRE

  2. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY WITH DIFFERENTIAL SUPPORT

    Click here

  3. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 2 differential mount cushion.

      SST
      09570-48010
      A002B67C01
      *a Front of the Vehicle - -

      Note


      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Be sure to use the correct direction of SST.

      • Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 2 differential mount cushion by an equal amount.

  4. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 2 differential mount cushion.

      SST
      09570-48010
      A002CKXC01
      *a 0° +/- 3° *b Protrusion
      *c Front of the Vehicle - -
      Standard Distance (A)
      9.8 to 10.8 mm (0.386 to 0.425 in.)

      Note


      • Make sure that the rear No. 2 differential mount cushion is aligned within 3° from the center.

      • Install the rear No. 2 differential mount cushion so that the protrusion is positioned as shown in the illustration.

      • Temporarily install the rear No. 2 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

      • Before using SST, apply grease to the SST bolt.

      • Be sure to use the correct combination of SST.

      • Be sure to use the correct direction of SST.

      • Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 2 differential mount cushion by an equal amount.

  5. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY WITH DIFFERENTIAL SUPPORT

    Click here

  6. INSTALL SPARE TIRE