FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FE) INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A0029K5

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. B00406FC02
      *A for LH Side
      *B for RH Side

      Check whether each drive shaft dimension (A) is within specification.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A) (for 2WD)
      for LH Side 604.44 mm (1.98 ft.)
      for RH Side 921.64 mm (3.02 ft.)
      Dimension (A) (for AWD)
      for LH Side 604.44 mm (1.98 ft.)
      for RH Side 924.14 mm (3.03 ft.)