SEAT HEATER CONTROL(for Rear Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (for 60/40 Split Seat Type LH Side)


    1. Engage the 2 clamps to install the seat heater control sub-assembly to the rear No. 1 seat assembly.

    2. Connect the 2 connectors.

    3. A01QVKW

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration.

  2. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (for 60/40 Split Seat Type RH Side)


    1. Engage the 2 clamps to install the seat heater control sub-assembly to the rear No. 1 seat assembly.

    2. Connect the 2 connectors.

    3. A01QVH4C01
      *a Hook
      *b Hog Ring

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration.

    4. Engage the hook.

  3. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    Click here

  4. INSTALL REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here