REAR SEATBACK HEATER(for 60/40 Split Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SEAT HEATER ASSEMBLY

   
   

   1. 

      Install the seat heater assembly to the separate type rear seatback cover with 10 new tag pins.

      Note

      Be careful not to damage the separate type rear seatback cover.

2. INSTALL SEPARATE TYPE REAR SEATBACK COVER

   Click here

3. INSTALL REAR SEATBACK COVER WITH PAD

   Click here

4. INSTALL REAR SEAT SHOULDER BELT COVER

   Click here

5. INSTALL SEAT BELT ANCHOR COVER CAP

   Click here

6. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

   Click here

7. INSTALL REAR NO. 1 SEAT COVER BEZEL

   Click here

8. INSTALL REAR SEATBACK LOCK STRIKER COVER

   Click here

9. INSTALL NO. 2 RECLINING REMOTE CONTROL LEVER KNOB

   Click here

10. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

    Click here

11. INSTALL REAR SEATBACK COVER RH

    Click here

12. INSTALL REAR SEATBACK COVER

    Click here

13. INSTALL REAR SEAT CUSHION COVER WITH PAD

    Click here

14. CONNECT REAR SEATBACK HEATER HARNESS

    Click here

15. CONNECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY

    Click here

16. INSTALL REAR SEAT HINGE COVER

    Click here

17. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

18. INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER

    Click here

19. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE

    Click here

20. INSTALL REAR SEAT COVER CAP

    Click here

21. INSTALL REAR SEAT INNER BELT ASSEMBLY

    Click here

22. INSTALL REAR SEAT REAR CUSHION MOULDING RH

    Click here

23. INSTALL NO. 1 REAR SEAT CENTER ARMREST PLATE

    Click here

24. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

    Click here

25. INSTALL CENTER ARMREST HINGE COVER RH

    Click here

26. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here