LUMBAR SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER SEAT SWITCH ASSEMBLY


    1. A018JH3C02
      *a

      • Hold Switch (for LHD)

      • Release Switch (for RHD)
      *b

      • Release Switch (for LHD)

      • Hold Switch (for RHD)
      *c

      Component without harness connected

      (Power Seat Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Hold switch pressed Below 1 Ω
      3 - 5
      1 - 2 Off
      2 - 3
      1 - 5 Release switch pressed
      2 - 3

      If the result is not as specified, replace the power seat switch assembly.