REAR NO. 2 SEAT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Place the rear No. 2 seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporarily install the rear No. 2 seat assembly with the 6 bolts.

    3. A018LEJN01

      Tighten the 3 bolts on the rear side of the rear No. 2 seat assembly.

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

      Torque:
      36.7 N*m  { 374 kgf*cm, 27 ft.*lbf }
    4. A018KR4N01

      Tighten the 3 bolts on the front side of the rear No. 2 seat assembly to install it.

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

      Torque:
      36.7 N*m  { 374 kgf*cm, 27 ft.*lbf }

  2. INSTALL REAR SEAT LEG COVER LH


    1. A018JP9N01

      Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the rear seat leg cover LH.

  3. INSTALL REAR SEAT LEG COVER


    1. A018KA1N01

      Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the rear seat leg cover.

  4. INSTALL REAR SEAT LEG COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY

    Click here